A clogged drain can be the source of serious problems including damage to the home and several health concerns. Eliminating this concern is not too hard, provided the person handling the task has some knowledge of plumbing and drainage systems. An experienced Drain Cleaning Company in Modesto CA will usually make short work of clogs and may provide the means to prevent them for a while.
The most common sort of drain clogs are the ones that occur inside the home. These are typically found in the P-traps that are used to prevent the entry of sewer gases into the building. Eliminating the blockage requires removal of the trap and eliminating the debris inside.
The more troublesome clogs can be found in the large pipes that carry the sewage out of the building. The methods for installing a drain system may vary, but most installations connect the various outlets to a single, main pipe before running that pipe outside of the building. Sometimes, this can cause problems when the solid waste gets caught in a connection or on a sharp angle.
Eliminating these types of clogs may be difficult if the sewage system does not provide an access vent. In fact, removing a clog in the main household drain line often requires the removal of a toilet and the use of a pipe snake, also known as a rooter. The pipe snake is a long, flexible cable that allows movement around obstacles and curves. This means the rooter can reach places that would otherwise be impossible to access.
When an external access point is available, a Drain Cleaning Company in Modesto CA can easily eliminate the problem. The use of a strong rooting tool may be required because the solid waste tends to pack in tightly before it finally blocks the flow of waste water. This problem can be compounded when the waste is mixed with low quality, powdered detergents and/or grease.
Preventing clogs in a sewer line requires the occasional cleaning of the pipe interior. Waste, paper and other junk can collect in various places, and this leaves the pipe walls dirty and sticky. Because the sewer system is a low flow environment, the waste can accumulate and form blockages. Eliminating them may require the use of a high-pressure water system known as a hydro-jet tool. Get additional info here and avoid potential damage to the home.
